Features of machinery
1.Module open section
1.1 Employ the electric potentiometer to display the actual postition for operating the module,with 4 sections of pressure and set speed.
1.2 Low pressure protection loop with the digits set.
1.3 Quick in opening of module.
1.4 Automatic in adjusting of module.
1.5 Employ the electrical potentiometer to display the actual position for the module for oil pressure,with 2 sections of pressure, speed setting and slowdown modeled in repeatation,modeled in vibration,modeled in advance of holding and modeled in advance of holding of time.
2. Oil pressure section
2.1 Logic loop design, quick in reaction and little in internal leakage.
2.2 Warning if oil temperature overlow in action.
2.3 Warning if oil temperature overlow in action.
3. Electrical section
3.1 Control by the computer made by Mengli Co in TAiwan with liquid crystal display.
3.2 Store 80 sets of data for module.
3.3 Automatic in failure display.

Model

-

100T

118T

138T

180T

Injection parts

-

Max.injection capatcity

grms

136

186

186

243

283

359

443

396

489

592

-

Oz

4.5

6

6

8

9

11.5

14

12.5

15.5

19

Screw Diameter

Mm

30

35

35

40

40

45

50

45

50

55

Injection volume

Cm3

148

202

202

263

307

389

480

429

530

641

Max.injection pressure

Kg/m2

2800

2057

2057

1575

2327

1839

1490

2322

1881

1555

Injection rate

Cm3/sec

65

89

89

116

95

120

149

114

141

171

Screw rolling speed

Rpm

235

235

208

190

Mould clamping parts

-

-

-

-

-

Max.mould clamping size

Mm

340กม340

380กม380

420กม380

470กม420

Table size

Mm

525กม525

570กม570

620กม580

700กม650

Mould thickness

Mm

125-320

125-380

100-450

120-500

Open mould travel

Mm

300

350

370

425

Front mold loop diameter

mm

120

120

120

120

Lifting moulld travel

mm

95

95

95

110

Mould clamping force

tous

95

112

132

180

General information

-

-

-

-

-

Electronic heating stages

zons

4

4

4

4

Electronic heater capacity

Kw

5.0

5

7.7

9.4

Motor power

hp

15

15

20

25

Oil tand volume

L

225

225

278

380

Machine dimension (LxWxH)

M

4.9กม1.25กม1.68

5.0กม1.2กม1.75

5.5กม1.3กม1.78

5.8กม1.35กม1. 85

Weight(Approximate)

Kgs

3900

4200

5000

6300